A vertical pillar clamp holds a round post in a fixed position on a fixture, machine base, or support bracket. Use the post diameter, clamp mounting face, and required axis location to define the part.

Round Post Fit and Retention
Specify the post outside diameter and tolerance, surface finish, and available engagement length. Give the load direction and any axial stop or other retention feature required by your assembly. Provide clearance to reach the clamp screw.
Mounting Face and Post Alignment
Dimension the bore axis relative to the mounting face, including offset or perpendicularity where required. Show mounting-hole centers, fastener clearance, and any thread size, pitch, and depth. For a round guide shaft supported from a base, see the Linear Rail Shaft Guide Support.
Aluminum Grade and Finish
6061 and 6063 aluminum can be reviewed to the drawing. Specify natural or black anodizing where required. Identify bore and mounting surfaces with controlled finish thickness or fit. Explore our CNC machining processes.
Bore, Slot and Inspection
Drawing references include an H7 bore or a separately specified bilateral bore tolerance of ±0.01–0.02 mm. References for the clamp slot and general dimensions are ±0.02–0.05 mm and ±0.05 mm respectively. Mark the inspection datums and specify whether the bore is measured in its free state or under a defined clamping condition.
Request a Vertical Pillar Clamp Quote
Send the clamp and post drawings, post fit, bore axis location, mounting pattern, fastener scope, material, finish, and quantity.
Discuss your vertical pillar clamp project or email eleven@grancen.com.

Reviews
There are no reviews yet.