• Assortment of solar roof clamps with slotted mounting tabs and clamping bolts
  • Solar roof mounting profile with a raised top flange, three mounting holes and a hollow center
  • Solar roof clamp with a tapered lower opening, slotted top plate and two clamping bolts
  • Solar roof clamp with a black-lined lower jaw and a flat top plate with two bolts
  • Solar roof mounting profile with a hollow center, top channel and flared lower feet
  • Solar roof clamp with a curved lower opening, ribbed top plate and two side bolts
  • Solar roof clamp with a rounded lower jaw, ribbed top plate and two side bolts
  • Solar roof clamp with a narrow lower jaw, slotted top plate and two side bolts

Solar Panel Roof Clamp

Product Name: Solar Panel Roof Clamp

Material Options: Aluminum Alloy (6061/6063) / Stainless Steel (SUS304/SUS316), as specified

Connection Type: Roof-profile clamp with an upper mounting interface, defined by the part and assembly drawings

Surface Finish: Anodized / Passivated, selected for the material

Interface Requirements: Confirm the roof-profile section, contact conditions, mating rail or bracket and fastening details

Processing Method: CNC Machining / Aluminum Extrusion / Surface Treatment, selected for the profile

Tolerance Reference: ±0.05–0.10 mm; confirm critical features on the drawing

Application: Connection components for specified PV roof-mounting assemblies

Solar Panel Roof Clamp

Custom roof-profile clamps and upper mounting interfaces

Solar roof clamp with a tapered lower opening, slotted top plate and two clamping bolts

A solar panel roof clamp provides a connection interface within a PV mounting assembly. The pictured configuration has a tapered lower clamping opening, a slotted top plate and two clamping bolts. Review the lower jaw against the intended roof-profile section and the upper plate against the mating rail or bracket drawing.

Material options include aluminum alloy (6061/6063) and stainless steel (SUS304/SUS316). Specify the grade, material condition, section thickness and finish for the chosen configuration. The photographed profile is a geometry example; material and interface requirements are defined in the project specification.

Roof-Profile and Upper Connections

  • Lower Contact Geometry: Provide the roof-profile section, contact dimensions and permitted contact conditions.
  • Upper Mounting Interface: Define the plate, slot, hole and mating rail or bracket requirements.
  • Fastening Details: Specify the clamping and connection components, threads and assembly clearances.
  • Configuration: Show the required clamp profile and any drawing-defined adjustment features.
  • Project Interfaces: Include the supporting substrate and the roof assembly’s connection and waterproofing design requirements.

The mounting-system design defines wind, snow, thermal movement and other load cases. Supply the applicable roof and connection acceptance criteria with the component drawings so the manufacturing requirements can be reviewed.

Tolerance & Dimensions

Mark the dimensions controlling roof-profile engagement, upper connection fit and fastening alignment. Confirm the figures below for the selected material, size, process and finish, and agree the inspection method for each critical feature.

  • Thickness Tolerance: ±0.05–0.10 mm
  • Hole Position Tolerance: ±0.05 mm
  • Clamping Range Tolerance: ±0.10 mm
  • Flatness: ≤0.3 mm
  • Surface Roughness: Ra ≤ 1.6–3.2 μm
  • General Dimensional Tolerance: ±0.05–0.10 mm

Manufacturing and Finishing

The clamp section, fastening requirements and quantity guide the production route. Suitable aluminum profiles may use extrusion followed by drawing-defined machining.

  • Aluminum extrusion, subject to profile and tooling review
  • CNC milling, drilling, slotting and thread tapping
  • CNC turning of custom fastening components where specified
  • Deburring, polishing and edge finishing
  • Anodizing for suitable aluminum parts, or passivation for suitable stainless steel parts
  • Specified coating, identification or logo marking
  • Assembly of the defined clamp body, bolts and nuts
  • Inspection of agreed dimensions, interfaces and appearance

Mechanical retention, contact effects and structural acceptance requirements are defined for the complete connection and its specified supporting assembly.

PV Roof-Mounting Applications

Clamp configurations can be reviewed for residential, commercial or industrial PV roof projects. Provide the actual roof, rail and bracket interfaces for the intended assembly. A different mounting arrangement requires its own component and connection drawings.

Send Your Clamp Interface Drawing

Send the roof-profile section and clamp drawing with mating rail or bracket details, material grade, finish and quantity. Include fastening requirements, critical fits, prototype needs and the agreed inspection or assembly-verification criteria.

Explore our CNC machining processes or discuss your roof clamp requirements. You can also contact eleven@grancen.com directly.

Reviews

There are no reviews yet.

Be the first to review “Solar Panel Roof Clamp”

Your email address will not be published. Required fields are marked