Solar Conductive Sheet
Custom metal contact parts for PV mounting assemblies

A solar conductive sheet is a cut or formed metal part specified for a contact interface in a PV mounting assembly. The image shows an assortment of flat plates with holes, tabs and shaped cutouts beneath a mounting block. Each plate profile and contact feature is defined by its component drawing and mating parts.
Material options include stainless steel, copper alloy and aluminum. Specify the grade, material condition and surface treatment for the particular interface. These materials are reviewed separately against the contact, mechanical and environmental requirements of the project.
Contact-Part Geometry
- Plate Profile: Define the outline, thickness, holes, slots and mating clearances.
- Contact Features: Serrated, embossed or flat surfaces can be reviewed. Show the required feature geometry and contact locations on the drawing.
- Mating Surfaces: Identify the adjoining materials and their coatings or surface conditions.
- Fastening Interface: Provide the assembly layout, mounting features and specified fastening requirements.
- Acceptance Criteria: For a grounding or bonding application, supply the contact-resistance and continuity requirements for the complete assembled interface.
Dimensional and Electrical Requirements
Mark critical dimensions, datums and inspection points on the drawing. Confirm the figures below for the selected material, part size, forming features and finish. Define the required contact-resistance limit, test fixture, measurement method and conditions in the project acceptance plan.
- Thickness Tolerance: ±0.02–0.05 mm
- Length/Width Tolerance: ±0.05–0.10 mm
- Hole Position Tolerance: ±0.05 mm
- Flatness: ≤0.2 mm
- Surface Roughness: Ra ≤ 1.6–3.2 μm
- Electrical Contact Requirements: Agree the contact-resistance target and verification conditions for the specified mating assembly.
Sheet Metal Manufacturing
The plate design, material and quantity guide the tooling and production route. Raised contact features, surface treatment and any heat treatment are reviewed against the selected grade and part specification.
- Stamping or punching of suitable sheet metal blanks
- Laser cutting of specified outlines, holes and slots
- Embossing or serration forming where required by the drawing
- Passivation, plating or a specified protective coating, selected for the material and contact surfaces
- Deburring and edge finishing to the agreed condition
- Dimensional and appearance inspection against the agreed plan
Electrical contact verification is defined for the assembled connection, including the specified mating surfaces and fastening arrangement. Provide the applicable acceptance requirements with the part drawing.
PV Contact Components
Custom plate designs can be reviewed for specified module-to-mounting interfaces and other grounding or bonding connections in PV structures. The system designer defines the connection requirements and validation criteria for the intended project.
Send Your Contact-Part Drawing
Provide the component and assembly drawings with material, surface treatment and quantity requirements. Include contact-feature details, mating-surface specifications, critical dimensions and the agreed inspection or electrical verification criteria.
Explore our sheet metal fabrication processes or submit your solar contact-part requirements. You can also email eleven@grancen.com.

Reviews
There are no reviews yet.