Adjustable Angle Hinge

Product: Hinge block and end plate for a pivot interface.

Mounting: Provide hole layouts and mounting faces on both sides.

Pivot: Specify the axis, bore, and mating pin details.

Motion: Define angular travel, stops, and any holding requirements.

Material: Specify aluminum alloy or stainless steel for drawing review.

Finish: Identify the finish and controlled contact surfaces.

Inspection: State the pivot fit, datums, and any functional test.

This adjustable-angle hinge block provides a pivot interface between two mounting points. Share the mating drawings and required motion so the block, end plate, and pivot can be reviewed as an assembly.

Two adjustable hinge blocks with threaded mounting holes and pivoting end plates

Mounting Faces and Hole Patterns

Show the mounting faces and hole centers on both sides of the pivot. For threaded holes, specify the thread designation, pitch, depth, and fastener clearance. Include the installed space and access for assembly tools.

Pivot Geometry and Motion

Define the pivot axis, pin or bore dimensions, required angular travel, and any stops. State whether the application calls for free movement, an actuator linkage, or a defined holding mechanism. Provide the working moment, cycle requirements, and acceptance criteria where applicable.

Materials and Surface Finish

Aluminum alloy and stainless steel can be reviewed to the drawing. Specify the grade and finish, such as anodizing for aluminum or passivation or polishing for stainless steel. Identify pivot and mounting surfaces where coating or fit is controlled. Explore our CNC machining processes.

Pivot Fit and Inspection

Drawing references include an H7 pivot bore or a separately specified bilateral tolerance of ±0.01–0.02 mm. Give the matching pin size and intended fit, and define the datums, measurement condition, and any functional motion check.

Request an Adjustable Hinge Quote

Send the block and mating drawings, both hole patterns, required pivot fit and motion, material, finish, inspection notes, and quantity.

Discuss your adjustable hinge project or email eleven@grancen.com.

Reviews

There are no reviews yet.

Be the first to review “Adjustable Angle Hinge”

Your email address will not be published. Required fields are marked